home foundation treated with GMX waterproofing

Waterproofing Accessories

Products:


Ultra-Shield Masonry Sealer

Ultra-Shield Masonry Sealer is a solvent-based, silicone solution designed to damp proof above grade masonry surfaces. Ultra-Shield Masonry Sealer is a transparent, colorless, thin liquid. It bars water from exterior masonry (above grade) surfaces without changing the texture of the surface over which it is applied.

Data Sheet | SDS


Ultra-Shield Flashing Cement

Ultra-Shield Flashing Cement is a trowel-applied, asbestos-free, fibered asphalt-based cement suitable for flashing repairs. It contains long strand fibers for firm adhesion to vertical surfaces and additional sad resistance. Ultra-Shield Flashing Cement is recommended for installing new flashing or repairs to vertical flashing surfaces. It can also be used to seal vents, lap seams and to repair holes, tears, blisters etc.

Data Sheet | SDS


Gray Guard

Gray Guard is a heavy bodied, ready-to-use elastomeric acrylic resin paint. It damp proofs and beautifies all types of exterior and interior masonry surfaces. Acrylic modifiers in the Gray Guard compliment the acrylic modifier in the Ultra-Shield below grade waterproofing. Gray Guard will not peel, chip, blister, or crack. It is used for both new construction and restoration. It hides rust stains and discolorations, and it is non-fading and washable. Cured elastomeric film is mildew and algae resistant.

Data Sheet | SDS


Ultra-Shield Rubberized Cement

Ultra-Shield Rubberized Cement is a fiber-reinforced, asbestos-free cement that is rubber-modified to improve its performance. It cures to a flexible, tough, waterproof seal. Recommended for the repair of holes, tears, rips, etc. in asphalt or composition roofing. It can also be used to seal flashings, lap seams, vents, gutters and skylights. It is the ideal sealant for dissimilar construction materials (i.e. materials with differing coefficients of expansion/contraction).

Data Sheet | SDS


Ultra-Shield Self-Stick Primer

Ultra-Shield Self-Stick Primer is a non-fibered, quick drying, asphalt based roof primer. It is formulated from specially refined asphalt and top quality penetrating oils. It re-saturates existing felts to form a tough, elastic bonding surface for GMX coatings. It can also be used to prime metal, masonry surfaces and bare concrete roof decks. Meets and exceeds ASTM D 41

Data Sheet | SDS


Ultra-Shield Self-Stick Sealing Tape

Ultra-Shield Self-Stick Sealing Tape is a 40 mil pre-fabricated, self-adhering sealing tape. It is composed of a durable, multi-layer polymer film that is coated with a proprietary rubberized asphalt adhesive. Ultra-Shield Self-Stick Sealing Tape is recommended for sealing SIPS building panels, sealing around doors and windows and other potential leak areas and as a thru wall flashing material. It aggressively adheres to metal, wood, vinyl, masonry, gypsum and rigid board insulation.

Data Sheet | SDS


Hydroloc® WS

HydroLoc WS is a ready-to-use, non-solvent silicone based water repellent for concrete, GFRC, and most masonry and stucco surfaces. It helps masonry resist cracking, staining, spalling and other types of dam-age from water intrusion. HydroLoc WS will not impair the breathing capabilities of the treated surface and is alkaline stable.

Data Sheet | SDS


BiLar®

BiLar is a multi-component Class A vapor barrier composed of a highly puncture resistant tightly woven fabric coated with a strong, low perm, and long lasting polyolefin resin. Designed for use as a high-performance vapor barrier under slabs, permanent liner in sealed crawl spaces, in vertical waterproofing, and flashing applications. BiLar provides more abrasion and puncture resistance than standard 15 mil poly sheeting and exceeds standards set forth in ASTM E-1745-97 for plastic water vapor.

Data Sheet | SDS


BoneDry® TG

BoneDry TG is a commercial grade trowelable waterproofing mastic based on polymer modified asphalt emulsion. BoneDry TG can be effectively used as a sealant or patch for tie holes, protrusions, penetrations, cold joints and honeycombs. This product is also a great choice for repairing cracks, seam failures and other water penetration points on existing structures, or as an adhesive for flashing and other termination materials.

Data Sheet | SDS


BoneDry® RG

BoneDry RG is a commercial below-grade exterior waterproofing compound designed to be applied with a roller and exhibits excellent strength, adhesion, and flexibility. BoneDry RG is best used in applications for masonry, poured and pre-casted foundations as well as horizontal waterproofing, planters, retaining walls, and as cavity wall air barriers.

Data Sheet | SDS


RocLoc FSC

RocLoc FSC is a fast setting, non-shrinking hydraulic cement formulated to last the life of the structure. RocLoc FSC is ideal sealing active leaks, below grade plumbing/conduit penetrations, holes, cracks, cold joints, form ties, or other concrete/masonry irregularities in elevator pits, residential and commercial basements, tunnels, pipes, retaining walls, dams, tanks and mines.

Data Sheet | SDS

Image Gallery

Ultra-Shield Flashing Cement

USGBC LEED Logo